Description A pair of cranked hook and band hinges these are used on medium to heavy gates. These hinges are not adjustable for adjustable hinges see our Adjustable Hook And Band Hinges. This pair consist of two cranked bands (they are cranked to allow the gates to sit inside the posts) these bands are screwed and bolted across the rails on your gate. The cranked bands have tubes on the end which slot down onto the pins on the plates provided. The pins are screwed to your gate post or timber wall plate in the correct positions to hang your gate before lifting on the gate with bands attached. The gate will sit in-between the posts and flush in line to the front or the back. illustration showing how cranked bands and hook hinges are fitted to a pair of gates This is for one pair of hinges including a pair of pins with all necessary screws and bolts. Available in a 300mm(12″), 460mm (18″), 600mm (24″), 762mm (30″), 900mm (36″), 1220mm (48″) band depending on the width of your gate. Finish galvanised Remember the band hinge needs to be half the width of the gate leaf to take the weight of the gate.
