Sontronics STC-10 Small Diaphragm Condenser Microphone

Overview Frequency response: 30 Hz – 20 kHzInput impedance: 200 ohmsInput sensitivity: 11mV / paMax SPL 0.5% THD @ 1000Hz: 130 dBSwitchable 10 dB attenuationSwitchable 75 Hz high pass filterPolar pattern: CardioidPerfect for instruments or as a drum overheadRequires 48 V phantom power Features Small-diaphragm condenser microphone Cardioid polar pattern focuses audio capture on the subject in front of the microphone 30 Hz to 20 kHz frequency response with presence boost from 5 to 12 kHz and high-end roll-off above 15 kHz Pad with Off and -10 dB settings High-pass filter with Off and 75 Hz settings Standard 3-pin XLR connector Requires 48V phantom power Use for close-miking instruments Recommended for use on solo strings and woodwinds as well as acoustic guitars and other strummed instruments Pair with a second STC-10 (available separately) for overhead and stereo recordings Included Sontronics STC-10 Small-Diaphragm Condenser Microphone (Black) Mic Clip Foam Windshield Specifications Microphone Polar Pattern Cardioid Element Type Condenser Sound Field Mono Orientation End Address Controls Pad, Low Cut/HPF Pad -10 dB Filter & EQ Low-Cut Filter: 75 Hz Circuitry Solid-State Performance Frequency Response 30 Hz to 20 kHz Maximum SPL 130 dB (1 kHz, .5% THD) Equivalent Noise Level 18 dB (A-Weighted) Connectivity Analog Output 1x XLR 3-Pin Male Power Power Sources Phantom Power Operating Voltage 48 V (Phantom Power) Physical Color Black Dimensions ø: 0.8 x L: 5.9″ / ø: 21 x L: 150 mm Weight 4.4 oz / 125 g