High Compatibility: Nitze N82A cube adapter universal camera mount can be mounted to any accessories with 1/4” holes, 3/8” holes, 1/4” locating holes or 3/8” locating holes. Multiple Mounting Points: It features four-sided threaded holes, including two 1/4” locating holes and two 3/8” ARRI locating holes. The included 3/8” to 1/4” thread adapter could turn the 3/8” threaded hole into a 1/4” threaded hole. Included Screws: There are two 1/4” screws, two 3/8” screws and four locating pins are included. You can DIY the mounting solution according to your camera rig. Locating Pins Holes: The cube adapter provides a thoughtful design for your non-use locating pins. There are two holes on the front of the adapter. If you have two unused locating pins, you can put them here to prevent losing them. Attached Wrenches: The H3 hex spanner is for screwing 1/4” or 3/8” screws, while the blue flat-head screwdriver is for screwing the locating pins. What’s in the box 1 x N82A Cube Adapter (Four Sided) 2 x 1/4” Screw and 2 x 3/8” Screw 4 x Locating Pin 1 x 3/8” to 1/4” Thread Adapter 1 x Hex Spanner and 1 x Flat-head Screwdriver
